Permonat - Gympsum Hand Plaster

This is the bagged plaster based ready plaster, which may be applied directly on the materials such as brick, concrete, exposed concrete, aerated concrete, pumice concrete, etc. This removes the discrimination between scratch coat and finishing coat.

The Surface and the Setting to be Applied
-It should be free of dirty material such as dust, oil and paint.
- The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water.
- The surface of the ceilings should be roughened before applying the plaster or undercoated with a material to ensure attachment of the mortar.
- It should be paid attention that there is no air current and air circulation at the atmosphere during application.
- The application temperature should be between +5 and +35 ˚C.

APLICATION 6-6,5 liters of water is poured down into the mixture bowl; 10 kilograms of Peronat Plaster is added sprinkling into the water. It is awaited for a period of approximately 2-3 minutes in order to cause the plaster to absorb the water. It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture. The application thickness is determined with the help of an annular according to the smoothness of the surface. The prepared mortar is applied on the surface with the help of a steel trowel. The mortar is flatted trough surface finishing. The surface is flatted after surface finishing with the help of a steel trowel. If an application of two layers is to be applied, 2nd layer of application should not be started before the 1st layer settles.

PACKING
Polypropylene bags of 35 kg ( ± 2 %)

STORAGE
At most 15 bags should be stockpiled one on another at a dry place; the bags must not be in contact with the floor and they must be stored protected from humidity and condensation. They must be used within 9 months after production date.